How it is arranged
The cabinet provides an accessible enclosure for the specified hose valve and, where required, hose, nozzle, rack, reel or other equipment connected to the standpipe system.
Need fire hose cabinets? Start with a free site assessment.
We supply and install fire hose cabinets around the approved hose-station requirement, including the enclosure, valve, hose, nozzle, rack or reel where specified. We confirm the arrangement before quoting.
- Project-matched cabinetSize and mounting follow the equipment
- Complete hose stationSpecified valve, hose and nozzle coordinated
- Installation supportPositioning through maintenance
What should your fire hose cabinet include?
A cabinet is not a complete standpipe system by itself. Its enclosure, internal equipment, mounting and connection must match the approved hose-station arrangement.
Where it fits
Installed at designated hose-station locations shown on the approved fire-protection plan. Surface-mounted, recessed or semi-recessed construction depends on the wall, access and architectural coordination.
What we check
Cabinet dimensions and material, mounting type, door swing and glazing, hose and nozzle specification, valve size, rack or reel, signage, clear access, standpipe connection and corrosion exposure.
From
assessment
to
handover.
We review the building, water supply and operating arrangement before defining the standpipe scope and project sequence.
01
Site assessment
We review the building, water supply, current conditions, available plans and requirements.
02
Design & planning
We coordinate the risers, connections, water supply, pressure and installation scope.
03
Review quotation
We discuss the proposed scope, inclusions, commercial terms and questions before approval.
04
Supply & installation
Piping, valves, cabinets and site work follow the agreed project scope.
05
Testing & commissioning
The installed system is tested and commissioned against the approved project scope.
06
Service + BFP follow-up
We remain available for maintenance, project records and BFP-related follow-up within our scope.
Hose cabinets installed?
Keep every station accessible.
We inspect and maintain fire hose cabinets based on the installed enclosure, valve, hose, nozzle, rack or reel and agreed service scope.
- 01
Check cabinet condition, visibility, access, door operation, glazing, labels and mounting.
- 02
Review the hose valve, cap, gasket, hose, nozzle, rack or reel and visible connection.
- 03
Record missing, damaged, obstructed, corroded or leaking components and recommended replacements.
- 04
Provide service records and BFP-related follow-up connected to our supplied or serviced equipment.
FAQFire hose cabinets,
Fire hose cabinets,
made clear.
Straight answers about cabinet contents, mounting, hose-station equipment, replacement, maintenance and project information.
It is an enclosure where the specified fire hose, valve and related firefighting equipment are stored and arranged. The exact contents depend on the approved hose-station design.
No. The cabinet is one equipment point connected to or coordinated with the standpipe system. The riser, water supply, fire-department connection, valves and hydraulic design are separate parts of the complete installation.
Depending on the approved specification, the cabinet may include a hose valve, fire hose, nozzle, rack, reel, spanner or other accessories. We confirm the required contents before quoting.
We can review the required mounting arrangement against the wall construction, available depth, access and approved plans, then propose a cabinet configuration that fits the project scope.
Yes. Send photos, dimensions, location and the list of installed or missing equipment. We will confirm whether the cabinet, internal components or both need replacement.
Send the contact person, company, site location, quantity, mounting type if known, cabinet dimensions, required internal equipment, connection size and any plans, specifications, bill of quantities, photos or BFP comments available.
Completed work
Related DGRB projects
Selected DGRB projects involving this equipment or system category.
Dairy-production office building
Complete sprinkler network with pumps, 78 sprinkler heads, controls, drains, fire department connection and two existing fire-hose cabinets tied into the system.
Scope: Automatic fire sprinkler system and fire-hose cabinets
View the projectRequest a Site AssessmentTell us about your
Tell us about your
fire hose cabinet project.
Send the site location, whether the project is new or existing, and any plans or system details available. We’ll review the information and contact you about the next step.